Maintenance of Vacuum Furnace

In the process of using vacuum furnace, we usually encounter the problem of carbon deposit. Today, let's analyze some reasons for carbon deposit in vacuum furnace.

1. No charcoal burning for a long time;

2. Failure of carbon controller;

3. Long-term use of high carbon potential, excessive flow of rich gas, easy to appear furnace carbon deposition.

4. Uncontrolled atmosphere

5. The easiest carbon deposit is inadequate methanol cracking.

6. Excess adsorption due to poor decomposition

If carbon deposits in radiation tubes, the consequences will be more serious. It is easy to cause the furnace temperature to rise up or slow. In this case, we can tell you that burning carbon in vacuum furnace can effectively remove carbon deposits on Anti-carburizing bricks and radiation tubes. The method is that when there is no product in the front and back chambers of the vacuum furnace, the temperature of the back chamber should be around 800 C. Then open the front door with a sickle, then extinguish the fire-fighting sickle; open the middle door for about one minute, and then open the middle door for another minute after five minutes (so repeated three times). The carbon deposit in the furnace burns almost.

Vacuum Heat Treatment Furnaces

Vacuum Brazing Furnace