The furnace is used in conjunction with the PID intelligent temperature program control system, which can automatically indicate, control and record the temperature of the furnace.
Vacuum Annealing Furnace Equipment of Characteristics:
1. The equipment consists of two fixed stoves, a fixed stove body at one end of 14 meters and a movable heating cover. The fixed stove holds a vacuum muffle tank. The workpiece is heated in the vacuum muffle tank. The furnace temperature uniformity is high (< 10 C).
2. Full-fiber energy-saving lining can save more than 30% energy compared with composite brick-concrete lining.
3. In the vacuum annealing furnace, the movable hood is equipped with one end and a fixed door sealed by a vacuum muffle tank (with two masks sharing a movable door). The fixed furnace body is equipped with one end and a fixed door sealed by a vacuum muffle tank, and the other end is open type, with a sealing device, so that when the movable hood is combined with the movable hood, it can seal reliably and naturally with the furnace mouth.
4. The side knife type soft seal is used between the vacuum annealing hearth and the cover of the vacuum annealing furnace. The side knife of the hearth is inserted into the fiber of the cover when the cover enters the furnace, which makes the sealing between the hearth and the outside of the furnace adiabatic and simple and reliable.
Vacuum-Furnace-ultra-low-Carbon-Steel-Produced
Vacuum-Tempering-Furnace-of-Heating-Process
Vacuum-Furnace-Cooling-System
Vacuum-Gas-Quenching-Furnace-for-Powder-Materials
没有评论:
发表评论